Manual D900 Maintenance
49-MD900EN05
51
The section EAN13 format must be programmed by using the following substitution letters
3.4.2.Traceability
D-900 scales allow to program Generic Traceability, that is, it is possible to define up to 10 classes of
traceability (beef, fish, fruits, etc...) to which belong the traceability products from which the articles are
obtained.
This feature allows to print in receipts or labels the data of the product from which the article in use comes
from.
Every traceability class has defined a list of texts common for all the products of the class (i.e. for beef
these texts are: Born In, Raised In, Slaughtered In).
Every traceability class has 20 texts of Traceability (Questions)
The answers to the Traceability Questions are programmed on every individual product.
The programming to be done is the following:
Code DESCRIPTION Code DESCRIPTION
A
Group Number
G
Number of articles
B
Customer Number
H
Weight
C
Article Code
I
Type of VAT
D
Vendor Code
K
Section
E
Total amount of receipt
L
Manufacturer Code
F
Sign of the amount
Q
CheckDigit
Class asigned to the
products created by
Reading of EAN 128
barcode (see
paragraph. 3.10.3
Scanner Reading).
Selection of manual
or Automatic
Traceability Product
Selection Operative
(see. 2.8 Working
Modes)
Weight Control of the Traceability Product:
IGNORE: The escale does not control the weight of the Traceability Product
NOTICE: After recording a sale with traceability, the addition of weights of all the sales corresponding
to the product is bigger than the product weight, (see. 3.4.2.3 Product Programming) the scale will
show a warning message
DENY: Trying to memorise a sale with traceability, if the addition of weights of all the sales
corresponding to the product is bigger than the product weight, (see. 3.4.2.3 Product Programming)
the scale will not accept the sale.
Programming of Text
Tables and
Traceability Products
To Next Page
Loading...
