Dibal D900 Series User Manual

Manual D900 Operation
49-MD900EN05
21
2.8.2.Receipt Mode
In this working mode it is possible to make the sale of one or more articles and print the total amount of all
the operations.
2.8.2.1.Discount in line
In receipt mode, this option permits a percentage discount to be applied to a certain article. Proceed as
follows:
1. Check that the parameter for applying discounts has been set up correctly (User menu  Settings
 Receipt  Receipt printing  Discount in Line , see paragraph 3.9.3.4 Discount in line).
2. If we are not working on Receipt mode, change the working mode (see sect. 2.4 Working Mode
selection).
3. Effect the normal weight operation as far as the memorization step, without actually memorizing.
4. Enter the PERCENTAGE discount to be applied. (For example 50 represents 50%) This discount
will be directly reflected in the amount on the display and it will be applied to the receipt on the
corresponding article line.
5. Press the key .
6. Memorize and continue with normal operation
2.8.2.2.Receipt printing: Change calculation and discount in total
To print the total operations effected by a sales assistant, proceed as follow:
1. If we are not working on Receipt mode, change the working mode (see sect. 2.4 Working Mode
selection).
2. Effect a memorization operation in accordance with the sections above. For example, with sales
assistant .
3. To print the receipt press (on Receipt-2 working mode, press ) The scales will request the
number of the sales assistant with which the last operation is to be printed.
4. Press the corresponding sales assistant key for whom the operation is to be printed. For example
.
5. If the option Discount in Total is enabled (User Menu  Receipt  Receipt printing  Discount in
Total  YES, see paragraph 3.9.3.3 Discount in Total), the scale will show the number of
vendor, the number of articles in the receipt and the total amount. The scale will ask for the
percentage of discount to be applied to the receipt. Enter the value and press the key to print
the receipt.
If Discount in Total is not enabled, the scale will show the number of vendor, the number of articles
and the total amount and pressing it will print the receipt.
6. If the option Exchange Calculation is enabled (User Menu  Receipt  Receipt printing 
Exchange Calc.  YES, see paragraph 3.9.3.1 Exchange calculation), it is possible to type the
amount tendered by the customer. The display will then show the amount tendered by the
customer, the amount to be returned by the sales assistant or the change, and the amount to pay.
Press the key to print the receipt.
If no other operation is effected using the same memory, the receipt may be printed as many times as
required (see sect. 3.9.3.7 Receipt copy), and the following text will appear on the receipts:
*** Copy ***
If other data is memorized in the same memory, it is presumed that the operation corresponds to a
new customer, and data will be reset to 0.
If the parameter Basic operation 500 Range (see sect. 2.8.1.13 Basic operation 500 Range) is activated,
the key Discount in line refers to the price increase/decrease screen (see sect. 2.8.1.5 Price increase or
decrese) but with the option Increase disabled.

Dibal D900 Series Specifications

General

Brand	Dibal
Model	D900 Series
Category	Scales
Language	English