Maintenance Manual D900
49-MD900EN05
48
3.2.5.Training Mode
The scale D-900 has a special working mode for training of new vendors.
In this situation, the sales are not accumulated to the totals and the receipts and labels have printed a line
with the text “*** TRAINING MODE ***”.
To program a vendor in training mode:
1. Select the vendor key (if the vendor is not programmed we must program it before, see sect. 3.2.1
Quick vendors creation).
2. Select training mode by pressing .
3. The icon will be shown closet o the vendor code in the list and it will be remarked in blue color.
3.2.6.Visibility
It is possible to hide or show a vendor key in the display. To show a vendor in the display, select the
vendor and press the key . The icon will be shown close to the vendor’s code to indicate that
the vendor is visible.
To Next Page
Loading...
