Maintenance Manual D900
49-MD900EN05
36
Name: Name of the article (max. 20 characters).
Name 2: Name 2 of the article (max. 20 characters).
Name 3: Name 3 of the article (max. 20 characters).
Tare: Tare value associated to the article.
There are two programming modes:
- Enter the value with the numeric keyboard
- Placing the weight to be tare don the plate and pressing .
Label Format: Format used to print the label of the product that is being edited. You can enter a
value between 0 and 60* can be entered, with the following meanings:
- From 0 to 20: predefined formats.
- From 21 to 60*: user-definable formats.
Section: Code of the section (0 to 99) to which the article belongs.
PLU: Number of the direct key assigned to the article.
Type of Article: Change the value by pressing on the window.
The possible values are:
- WEIGHT. Type of article by default; the price per kilo will be programmed, and the amount will be
the weight of the product multiplied by the price. The article must be weighed by the scales.
- UNIT. The amount is the price of the article. The weight and the unit price are not printed. The article
does not have to be weighed.
- FIXED WEIGHT. The amount will be the product of the known weight of the article that has been
entered when programming the FIXED WEIGHT field, multiplied by the price. The article will not be
weighed, but the weight and price will both be printed.
A FIXED WEIGHT type PLU will be shown on the screen as a WEIGHT type PLU, with the
difference that instead of showing the tare on the bottom left side of the metrologic part of the
screen, an icon of a lock will be shown next to the weight. This icon indicates that the weight has
been fixed and that the weight placed on the plate is not taken into account.
- REFUND. The amount for this type of article will be discounted from the total sum, and the
amount will be shown on the display as a negative value. This amount will also be printed on the
receipt.
- FROZEN: The article must be weighed, but a percentage of the weight will be discounted from the
gross weight, representing the tare. The percentage is programmed in the parameter Tare %
Price per kg. Enter the value of the Price/kg or Price/unit of the article. If this value is set to 0, the
Price must be entered from the keypad during the sale.
VAT type: Enter the code corresponding to the 6 programmable VAT percentages
- 0: 0% (without VAT
- 1 a 5: VAT percentages programmed in VAT Table (see paragraph 3.4.8 Types of VAT).
VAT for direct price articles is type 1.
Class. Traceability class number of the article
- Class = 0: Without Traceability
- Class 0: With Traceability. Select the traceability class.
IDN. Identification Number, it is the number assigned to the traceability product from which the article
is obtained. There are a maximum of 99 products programmable in the scale and they can have an
IDN from 1 to 65535.
The printing parameter GLOBAL LABEL FORMAT must be set to 0 in order to program the above
(see paragraph 3.8.2.4 Label Format).
To Next Page
Loading...
