Manual D900 Maintenance
49-MD900EN05
61
CODE – WEIGHT – AMOUNT
CODES
ADD WEIGHING
ADD AMOUNTS
*** UNWEIGHED ARTICLES ***
CODE – UNITS – AMOUNT
CODES
UNITS
ADD AMOUNTS
There are different types of levels:
Level 1 (day’s sales)
Level 2 (weekly sales)
Level 3 (monthly sales)
You can filter the level of accumulated in paragraph 3.5.1 Filters and header lines. By default the scale
will print the report corresponding to level 1. For more information about levels of accumulated see the
paragraph 3.6.4.3.3 Levels deletion.
3.5.2.5.Sales per Article by PLU
This list shows the sales associated with each PLU, and includes the PLU, the designation and the
amount sold of each PLU. At the end of this list the total of the different articles sold and the sum of the
amounts is shown.
PLU – DESIGNATION – AMOUNT
CODES
ADD AMOUNTS
3.5.2.6. Sales by Vendor
When selecting this listing the scale will ask which vendor's list do you want to print. This list includes the
PLU, the designation and price of the articles sold by the selected employee. At the bottom of the list,
information regarding the length of time the employee has been registered (working) and operating the
scale (serving customers) is given.
PLU – DESIGNATION – amount
WORKING
ON DUTY
3.5.2.7.Group Total
This list shows the number of operations carried out and the sum obtained for each memory (sales
assistant). At the bottom the sum of the operations and the amounts is printed.
MEMORY – OPERAT. – AMOUNT
GR.TOTAL
There are different types of levels:
Level 1 (day’s sales)
Level 2 (weekly sales)
Level 3 (monthly sales)
You can filter the level of accumulated in paragraph 3.5.1 Filters and header lines. By default the scale
will print the report corresponding to level 1. For more information about levels of accumulated see the
paragraph 3.6.4.3.3 Levels deletion.
To Next Page
Loading...
