Maintenance Manual D900
49-MD900EN05
70
3.6.3.5.Backup
This mode allows to make a backup file of the scale or to restore the data from a backup file to the scale.
If we press Backup in the scale the next window will be shown, where we must press START.
Once we have put the scale in LBS mode, we will use LBS (Load Backup System) software to make a
back up copy of the scale or for loading programmed data.
The following screen will display once the program is run:
Enter the PC’s IP address as well as the IP address of the scale or scales you are working with.
Then you can make back-up copies of the scale (Backup) and restore the scale system using one saved
previously in the event that is has failed (Restore).
To Next Page
Loading...
