OPERATOR’S MANUAL
Flex4 Pro
TM
Control System
6010541 Rev A
APPENDIX A
CHANNEL
DESIGNATION
ASSIGNED TYPES OPTIONS Channel I/O #
GRANULAR Granular PWM Only
3
LIQUID Liquid PWM/Servo, Liquid - Pre-Wet,
Anti-Ice, or Vol/Area
1
AUX-S Liquid, Granular, Spinner
(PWM)
PWM Only, Liquid - Pre-Wet,
Anti-Ice, or Vol/Area
4
AUX Liquid, Granular (PWM/Servo) PWM/Servo, Liquid - Pre-Wet,
Anti-Ice, or Vol/Area
2
Channel Linking Conditions and Recommendations
1.
If GRANULAR is set to “Enable”, and LIQUID is configured as
PREWET, then LIQUID rate is linked to GRANULAR.
2.
If AUX-S is configured as GRANULAR and AUX is configured as
PREWET, then AUX rate is linked to AUX-S.
3.
If GRANULAR is set to “Enable”, and AUX is configured as PREWET,
and AUX-S is NOT Granular, then AUX rate is linked to GRANULAR.
4.
If GRANULAR is set to “Enable”, and AUX is configured as PREWET,
and AUX-S is configured as PREWET, then AUX and AUX-S rates are
linked to GRANULAR.
5.
If two separate GRANULAR-PREWET pairs are needed, configure the
system to comply with rules #1 and #2.
Examples
Single Granular, Spinner
GRANULAR ENABLED PWM
LIQUID NOT USED NOT USED
AUX-S SPINNER PWM
AUX NOT USED NOT USED
Single Granular, Pre-Wet, Spinner
GRANULAR ENABLED PWM
LIQUID PRE-WET PWM/SERVO
AUX-S SPINNER PWM
AUX NOT USED NOT USED
APPENDIX A / 143
To Next Page
Loading...
