Dickey-John Flex4 Pro - System Setup (F10); Blast Setup

OPERATOR’S MANUAL
84 / SYSTEM PROGRAMMING
SYSTEM SETUP (F10)
System setup defines the following parameters:
• Blast Setup
• Date and Time
• Units and Language
• Service
• Troubleshooting
• GPS Sensor
To access the System Setup Screen:
1. Press the F10 key to display the System menu screen.
2. At the System Setup screen, press the respective item number to open
a menu item.
Figure 75
System Setup Screen
BLAST SETUP
1. Press 1 on the keyboard to select Blast Setup.
Figure 76
Blast Setup Screen
Flex4 Pro
TM
Control System
6010541 Rev A