Interfaces Wide Area Networks (WANs)
AnywhereUSB® Plus User Guide
136
(config)> network modem modem max_intfs int
(config)>
7. Carrier switching allows the modem to automatically match the carrier for the active SIM.
Carrier switching is enabled by default. To disable:
(config)> network modem modem carrier_switch false
(config)>
8. Set the type of cellular technology that this modem should use to access the cellular network:
(config)> network modem modem access_tech value
(config)>
Available options for value vary depending on the modem type. To determine available
options:
(config)> network modem modem access_tech ?
Access technology: The cellular network technology that the modem may
use.
Format:
2G
3G
4G
4GM
4GT
all
Default value: all
Current value: all
(config)>
The default is all, which uses the best available technology.
9. Set whether the modem should use the main antenna, the auxiliary antenna, or both the main
and auxiliary antennas:
(config)> network modem modem antenna value
(config)>
where value is one of the following:
n
main
n
aux
n
both
10. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
To Next Page
Loading...
Need help?
General