Digi AnywhereUSB Plus User Manual

Revision Date Description
Release of Digi AnywhereUSB Plus firmware version 21.5:
n
Wi-Fi enhancements:
l
Added support for WPA3 Wi-Fi encryption:
o
WPA2/WPA3 Personal
o
WPA3 Enhanced Open
o
WPA3 Personal
l
Added support for WPA and WPA/WPA2 mised mode with
TKIP.
n
Cellular enhancements:
l
Added support for modem firmware update to the Admin CLI.
l
Added support for over-the-air (OTA) modem firmware
update to check, list, and update to new modem firmware
from the Digi firmware server.
l
Added the ability to scan for cellular carriers on the Modem
status page and the ability select a particular PLMN/network
to use.
n
Added commands for over-the-air (OTA) system firmware update
to check, list, and update to new firmware from the Digi firmware
server.
n
Added a show dns command to the Admin CLI to display active
DNS servers and their associated interface.
n
Added a show ntp command to the Admin CLI to display the
status of the NTP service.
n
Expanded Port forwarding option to support a range of ports,
including one-to-one and many-to-one port mappings.
n
Added options to control packet filtering for the network
analyzer.
n
VPN enhancements:
l
IPsec enhancements:
o
Added support for multiple remote endpoints and the
ability to use round-robin or to randomly select an
endpoint to establish a tunnel to.
o
Added configurable options to control IKE transmit
interval, tunnel retry interval, and tunnel retry timeout.
l
LDAP enhancements:
o
Added a login attribute to provide the ability to match the
attribute set on an Active Directory server.
n
SureLink enhancements
l
Added the ability to configure how many times a SureLink
test must run, and must fail, before the interface is restarted
or the device is rebooted.
AnywhereUSB® Plus User Guide
5

Digi AnywhereUSB Plus Specifications

General

Brand	Digi
Model	AnywhereUSB Plus
Category	Switch
Language	English