Digi AnywhereUSB Plus User Manual

Virtual Private Networks (VPN) OpenVPN
AnywhereUSB® Plus User Guide
633
11. Configure test targets:
a. Add a test target:
(config vpn openvpn client openvpn_client1)> add connection_monitor
target end
(config vpn openvpn client openvpn_client1 connection_monitor target
0)>
b. Set the test type:
(config vpn openvpn client openvpn_client1 connection_monitor target
0)> test value
(config vpn openvpn client openvpn_client1 connection_monitor target
0)>
where value is one of:
n
ping (IPv4) or ping6 (IPv6): Tests connectivity by sending an ICMP echo request to a
specified hostname or IP address.
l
Specify the hostname or IP address by using ping_host or ping_host6:
(config vpn openvpn client openvpn_client1 connection_monitor
target 0)> ping_host host
(config vpn openvpn client openvpn_client1 connection_monitor
target 0)>
l
(Optional) Set the size, in bytes, of the ping packet by using ping_size or ping_
size6:
(config vpn openvpn client openvpn_client1 connection_monitor
target 0)> ping_size [num]
(config vpn openvpn client openvpn_client1 connection_monitor
target 0)>
n
dns (IPv4) or dns6 (IPv6): Tests connectivity by sending a DNS query to the
specified DNS server.
l
Specify the DNS server. Allowed value is the IP address of the DNS server.
(config vpn openvpn client openvpn_client1 connection_monitor
target 0)> dns_server ip_address
(config vpn openvpn client openvpn_client1 connection_monitor
target 0)>
n
dns_configured (IPv4) or dns_configured6 (IPv6): Tests connectivity by sending a
DNS query to the DNS servers configured for this interface.
n
http (IPv4) or http6 (IPv6): Tests connectivity by sending an HTTP or HTTPS GET
request to the specified URL.
l
Specify the url. Allowed value uses the format http[s]://hostname/[path].
(config vpn openvpn client openvpn_client1 connection_monitor
target 0)> http_url url

Digi AnywhereUSB Plus Specifications

General

Brand	Digi
Model	AnywhereUSB Plus
Category	Switch
Language	English