Log in to the device
Digi TransPort User Guide 101
Log in to the device
To configure the router via the Web interface, either establish a DUN connection to it and then
open your web browser and enter 1.2.3.4 for the web address, or enter the router’s Ethernet IP
address (192.168.1.1) into your web browser after configuring your PC to have an address on the
same subnet.
You will be presented with a login page similar to the following image.
The default Username and password are username and password respectively. Enter these and
click the Log in button to access the configuration pages. The password will be displayed as a
series of dots for security purposes.
Note For security purposes, Digi recommends changing the username and password for all
users away from their defaults. See Change the default username and password for a user
on page 648.
To Next Page
Loading...
