Digi TransPort - Transport WR41 Hardware

TransPort WR41 hardware
Digi TransPort User Guide 50
TransPort WR41 hardware
TransPort WR41 front panel features
1. USB host connector: The USB host connector may be used to connect compatible USB 2.0
client devices such as memory sticks, and serial adapters. The total current available to power
USB devices is 0.5A.
2. POWER LED:
• Off: No power
• Green: TransPort device is powered
3. Secondary Wi-Fi antenna connector (Wi-Fi models only): This SMA connector is used to
connect the router’s secondary Wi-Fi antenna (if fitted).
4. LAN LED: Illuminates steadily when there is a network connection to the LAN port and flashes when
data is transmitted or received.
5. WN LED:
• Wi-Fi models: Illuminates steady if Wi-Fi activity is present.
• Non-Wi-Fi models: Flashes to show which network mode the router is operating in:
Off: No service
1 blink: GPRS mode
2 blinks: EDGE mode
3 blinks: UMTS mode
4 blinks: HSDPA mode
5 blinks: HSUPA mode
6 blinks: LTE mode
6. LINK LED: Illuminates steadily when a wireless WAN data connection has been established.
7. SIM LED: Illuminates steadily when a valid SIM card is installed.
8. ACT LED: Flashes to indicate that data is being transferred over the wireless WAN network.
1
2
3
4
5
6
7
8
9 10
11
12