Event Logcodes parameters
Digi TransPort User Guide 602
Event Logcodes parameters
On the Event Logcodes page, you can edit the logcodes that describe events entered in the
EVENTLOG.TXT file. If a change is made to the logcodes.txt file, the changes are saved in the file
logcodes.d, so that when a firmware upgrade is performed, the changes to the logcodes are
retained.
The Event Logcodes page initially shows a table containing the event descriptions and reason.
Clicking on any of the items that are links in the table opens a configuration page associated with
that item. The newly-opened page allows that item to be configured. The configuration options
shown on that page are described below.
Event
This is not a configurable parameter; it is simply the event number, displayed for information
only. This is the number to refer to when filtering events in the event log settings
Configuration > Alarms > Event Settings.
Description
A description of the event code. Clicking on a link in this field brings up the configuration page
associated with that event.
Filter
This parameter is for information only. If event filtering is applied to an event, the associated
filter is shown as On. This is a result of enabling the parameter Do not log this event as
described below.
Event Priority
Controls the priority of the event and is used to determine whether an event will trigger email,
SMS messages or SNMP traps.
Reasons
The reason why the event occurred. Not every event has a list of reasons.
To Next Page
Loading...
