Log out and return to the login page
Digi TransPort User Guide 103
Log out and return to the login page
To log out the current user and return to the web interface login page, select Logout.
Accessing the web interface Via a LAN port
By default, the Digi Transport has a static IP address of 192.168.1.1 with DHCP server enabled. To
access the router using a web browser (such as, Internet Explorer), simply connect an Ethernet
cable between the LAN port on the Digi Transport and your PC. Make sure your PC is setup to
automatically receive an IP address by selecting Start > Control Panel > Network >
Configuration and verifying the configuration.
Note All models are auto-sensing for 10/100 operation. Most models are also auto MDI/MDX,
such as will automatically work with either a straight-through or cross-over cable. The only
exceptions are the IR2140 and GR2130, which are NOT auto MDI/MDX.
To Next Page
Loading...
