RADIUS parameters
Digi TransPort User Guide 683
RADIUS Client n parameters
Configuration > Security> Radius > RADIUS Client n
The following pages describe the configuration parameters available for setting up a RADIUS
client on the router.
Authorization
Primary Authorization Server
IP Address a.b.c.d
The IP address of the primary authorization NAS.
NAS ID
An identifier passed to the primary authorization NAS and is used to identify the RADIUS
client. The appropriate value will be supplied by the primary authorization NAS administrator.
Password
The password supplied by the primary authorization NAS administrator and is used in
conjunction with the primary authorization NAS ID to authenticate RADIUS packets.
Confirm Password
Type the above password into this text box so that the router can determine if the two are
identical.
Secondary Authorization Server
IP Address a.b.c.d
The IP address of the secondary authorization NAS server.
NAS ID
An identifier passed to the secondary authorization NAS and is used to identify the RADIUS
client. The appropriate value will be supplied by the secondary authorization NAS
administrator.
Password
The password supplied by the secondary authorization NAS administrator and is used in
conjunction with the secondary authorization NAS ID to authenticate RADIUS packets.
Confirm Password
Type the above password into this text box so the router can determine if the two are
identical.
Enable local authorization if there is no response from the authorization server(s)
Enables or disables local authorization if the RADIUS servers are unreachable or not
configured. Default is enabled. Un-check the box to disable local authorization.
To Next Page
Loading...
