Digi TransPort - Advanced Security Settings

Advanced security settings
Digi TransPort User Guide 691
Advanced security settings
The parameters described in this section should not normally need to be adjusted.
Use source IP Address x,y
If required, due to the TACACS+ server being accessed via a VPN tunnel, an alternative source
interface and instance may be selected here. Select the required interface from the drop-
down list and enter the instance of that interface into the adjacent text box. The available
interface options are
•Auto
• PPP
•Ethernet
Response Timeout s seconds
Text bo x
Stop the negotiation if there is no activity for s seconds
The amount of time (in seconds) before an inactive socket is closed.
Related CLI commands
Entity Instance Parameter Values Equivalent Web Parameter
tacplus 0 ip_ent Blank,ETH,PPP
Blank=Auto
Use source IP Address x,y
tacplus 0 ip_add 0-2147483647 Use source IP Address x,y
tacplus 0 respto 0-2147483647
Default=30
Response Timeout s seconds
tacplus 0 inact 0-2147483647
Default=30
Stop the negotiation if there is no
activity for s seconds