IP Routing parameters
Digi TransPort User Guide 352
IP Routing parameters
Enable CIDR routing
When enabled, the following six text boxes are displayed:
Connected Interfaces
The CIDR metric that the router should apply to connected interfaces.
Static Routes
The CIDR metric that the router should use for static routes. The default is 1.
eBGP Routes
The CIDR metric that the router should use for eBGP routes. The default is 20.
OSPF Routes
The CIDR metric that the router should use for OSPF routes. The default is 110.
RIP Routes
The CIDR metric that the router should use for RIP routing. The default is 120.
iBGP Routes
The CIDR metric that the router should use for iBGP routes. The default is 200.
Maximum static route metric
The maximum value for the routing metric. The default is 16.
To Next Page
Loading...
