Event Settings parameters
Digi TransPort User Guide 599
Syslog Messages parameters
As well as logging events to an internal log file and to a file on a USB flash drive, the router can log
events to a Syslog server.
To configure the router to send Syslog messages to a Syslog server, set the following values in the
web interface:
Send Syslog messages
When this checkbox is checked, the following options are displayed:
Send a Syslog message when the event priority is at least n
The lowest-priority event that will generate a syslog message. For example, if this value is set
to 6, only events with a priority of 6 or lower (7, 8, or 9) will trigger an automated syslog
message. To disable syslog messages, set this value to 0.
Send a maximum of n Syslog messages per day
Sets the limit on the number of syslog messages that may be sent during any 24-hour period.
The intention is to prevent excessive alerts being sent when the event trigger value is set to a
high priority/low value (1, 2, or 3 for example), such as a value that results in a large number of
syslog messages being generated.
n Syslog messages have been sent today
A status message that indicates how many Syslog messages have been sent in the last 24-
hour period.
Related CLI commands
.
Entity Instance Parameter Values Equivalent Web Parameter
event n syslog_trig 0-9 Send a Syslog message when the
event priority is at least n.
event n syslog_max 0-2147483647 Send a maximum of n Syslog
messages per day.
To Next Page
Loading...
