Digi TransPort - SSL Server Parameters

SSL Server parameters
Digi TransPort User Guide 457
SSL Server parameters
This page describes the parameters needed to configure the SSL server.
Server Certificate Filename
The file containing the server certificate is selected from this drop-down list.
Client Private Key Filename
The file containing the private key that matches the above certificate is selected from this
drop-down list.
SSL Version
The version of the SSL protocol to use, is selected from this drop-down list. Selecting Any
allows the use of any version. The available options are:
•Any
• TLSv1 only
• SSLv2 only
Cipher List
The list of ciphers is the same as described above for the client-side configuration table.
Related CLI commands
Entity Instance Parameter Values Equivalent Web Parameter
sslsvr 0 certfile Up to 12 characters
(DOS 8.3 format)
Server Certificate Filename
sslsvr 0 keyfile Up to 12 characters
(DOS 8.3 format)
Server Private Key Filename
sslsvr 0 ver Blank, TLS1, SSL2 SSL Version
sslsvr 0 cipherlist Colon-separated list Cipher List
sslsvr 0 debug OFF, ON n/a