Digi TransPort User Guide 476
Configure IP passthrough
This topic covers configuring IP Passthrough from the web interface and command line. It covers
the following topics:
• About IP passthrough on page 476
• IP Passthrough page configuration parameters on page 477
• Related CLI commands on page 478
About IP passthrough
IP passthrough is a useful feature if a host computer or server on the local area network needs to
have access to it from the Internet with a public IP address. With IP passthrough configured, all IP
traffic, not just TCP/UDP is forwarded back to the host computer. This feature can be useful for
applications that do not function reliably through network address translation.
To Next Page
Loading...
