Digi TransPort - Generate Vrrp Traps

SNMP parameters
Digi TransPort User Guide 641
SNMP Trap parameters
SNMP traps are events that are generated when the specified condition is met. The web page and
CLI configuration parameters are described here. The TransPort routers support two trap servers.
Generate Enterprise traps
When this check box is enabled, the router will generate product-specific traps.
Generate Generic traps
SNMP specifies several generic traps (Cold Start, Warm Start, Link Down, Link Up, etc).
When this checkbox is ticked, generic traps are generated.
Generate Authentication Failure traps
Enables the generation of authentication failure traps.
Generate VRRP traps
Checking this checkbox enables the generation of VRRP traps. For details on VRRP configuration,
see Ethernet VRRP Parameters on page 165.
Related CLI commands
Entity Instance Parameter Values Equivalent Web Parameter
snmp n enterprisetraps 0,1 Generate Enterprise traps
0=Off
1=On
snmp n generictraps 0,1 Generate Generic traps
0=Off
1=On
snmp n authtraps 0,1 Generate Authentication traps
0=Off
1=On
snmp n vrrptraps 0,1 Generate VRRP traps
0=Off
1=On