SNMP parameters
Digi TransPort User Guide 640
SNMP Filter parameters
SNMP filters allow the system administrator to control access to the router MIBs via SNMP. This
functionality is controlled by a table on the web configuration page. This table has three columns,
two main headed columns as described below and a control column containing button widgets.
The table has a capacity of ten entries, SNMP filter instances range from 0 to 9.
Username
The username (as configured in the Configuration > Security > Users section) of the user to
whom the access restriction is applied.
OID Prefix
The Object ID (OID) prefix for the range of objects in the MIB that the user is not allowed to
view. such as 1.3.6.1.2.1.4.
Add
Adds the username and OID prefix into the table.
Delete
Deletes the associated entry in the table.
Related CLI commands
Entity Instance Parameter Values Equivalent Web Parameter
snmpfilter n user username Username.
snmpfilter n oid Valid SNMP OID OID Prefix.
To Next Page
Loading...
