Digi TransPort - Page 639

SNMP parameters
Digi TransPort User Guide 639
SNMPv3
Username
This field is the name of the SNMP user.
Authentication None, MD5, SHA1
These three radio buttons select what authentication algorithm is to be applied to the SNMP
transactions.
Authentication Password
The authentication password for the user.
Confirm Authentication Password
The authentication password is not shown as clear text. The confirmation box allows a simple
check that the password has been entered correctly.
Encryption None, DES, AES
These three radio buttons select which encryption (privacy) algorithm should be applied to the
SNMP data.
Encryption Password
The user’s password that is used to control the privacy of the SNMP transactions is entered
into this text entry box.
Confirm Encryption Password
The encryption password is not shown as clear text. The confirmation box allows a simple
check that the password has been entered correctly.
Related CLI commands
Entity Instance Parameter Values Equivalent Web Parameter
snmpuser n community public / private Community
snmpuser n name user_name Username
snmpuser n auth Off,MD5,SHA1 Authentication, None, MD5,
SHA1
snmpuser n authPassword my_password Authentication Password
snmpuser n priv Off,DES,AES Encryption, None, DES, AES
snmpuser n privPassword my_password Encryption Password