Reboot the router
Digi TransPort User Guide 801
Reboot the router
To reboot the router immediately or at a scheduled time, select Administration > Reboot.
A reboot will be performed after any FLASH write operations have been completed. Also, one
second each is allowed for the following operations to be completed before reboot will take
place:
• IPSec SA delete notifications have been created and sent
• TCP sockets have been closed
• PPP interfaces have been disconnected
Immediately
Causes the router to reboot after a few seconds. The router will cleanly terminate any TCP and
VPN connections before rebooting.
In h hrs m mins s secs
Cause as reboot to be scheduled after the configured period of time.
A scheduled reboot can be canceled by clicking the Cancel button.
Related CLI commands
Command Options Equivalent Web Parameter
reboot n/a Immediately
reboot 0-86400 In h hrs m mins s secs.
This CLI value is entered in minutes only.
reboot cancel Cancel reboot
To Next Page
Loading...
