Regulatory and safety statements
Digi TransPort User Guide 90
Safety notices
1. Please read all instructions before installing and powering the router. You should keep these
instructions in a safe place for future reference.
2. If the power supply shows signs of damage or malfunction, stop using it immediately, turn off
the power and disconnect the power supply before contacting your supplier for a repair or
replacement.
3. Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. Use only the accessories,
attachments, and power supplies provided by the manufacturer-connecting non-approved
antennas or power supplies may damage the router, cause interference or create an electric
shock hazard, and will void the warranty.
4. Do not attempt to repair the product. The router contains no electronic components that can
be serviced or replaced by the user. Any attempt to service or repair the router by the user will
void the product warranty.
5. Products in the TransPort WR
family are designed for indoor use (except for the WR44 R) and
should be used in an environment that is suitable for computers and other electronic
equipment.
6. Ports that are capable of connecting to other apparatus are defined as SELV ports. To ensure
conformity with IEC60950 ensure that these ports are only connected to ports of the same
type on other apparatus.
To Next Page
Loading...
