Digi TransPort - Command Format; Example Commands

IP Port Forwarding / Static NAT Mappings parameters
Digi TransPort User Guide 380
Related CLI commands
Command format
Nat <entry> <parameter> <value>
Example commands
To set the IP address for entry 0 in the table to 10.1.2.10 enter the command:
nat 0 IPaddr 10.1.2.10
Entity Instance Parameter Values Equivalent Web Parameter
nat 0-29 minport 0-65535 External Min Port
nat 0-29 maxport 0-65535 External Max Port
nat 0-29 IPaddr Valid IP address
a.b.c.d
Forward to Internal IP Address
a.b.c.d
nat 0-29 mapport 0-65535 Forward to Internal Port