Digi TransPort - Page 194

Configure mobile interfaces
Digi TransPort User Guide 194
Mobile Network Settings CLI Commands
SIM Selection
This section allows you to launch the Dual SIM wizard for failing over from 1 SIM to another.
Click here to launch the Dual SIM wizard
Launches the Dual SIM wizard.
Entity Instance Parameter Values Equivalent Web Parameter
ppp 1 do_nat 1 Enable NAT on this interface
IP Address
ppp 1 do_nat 2 Enable NAT on this interface
IP Address and Port
ppp 1 ipsec 1 Enable IPsec on this interface
ppp 1 ipsec 2 Keep Security Associations (SAs) when this
Mobile interface is disconnected
ppp 1 ipsecent blank,ETH,PPP Use interface X, Y for the source IP address of
IPsec packets
x=Interface type
ppp 1 ipsecadd 0-255 Use interface X, Y for the source IP address of
IPsec packets
y=interface number
ppp 1 firewall OFF, ON Enable the firewall on this interface