Digi TransPort - Page 196

Configure mobile interfaces
Digi TransPort User Guide 196
Automatic provisioning
Sprint Vision uses Automatic provisioning (semi-automatic). In most cases, the TransPort router
can be provisioned without entering any information into the configuration page. If for some
reason the TransPort router is an older version using a module that does not support OMA DM,
three fields of information must be entered into the Automatic configuration page. This
information is provided by Sprint.

If required, enter the MSL/PTN/MSID parameters before clicking Start
MSL
The master subsidy lock (MSL) code. Get this code from the mobile operator.
PTN
The personal telephone number. Get this number from the mobile operator.
MSID
The mobile station identifier. Get this identifier from the mobile operator.
Automatic Provisioning CLI Commands
Entity Instance Parameter Values Equivalent Web Parameter
provision 0 string1 No data input
required
MSL
provision 0 String2 No data input
required
PTN
provision 0 String3 No data input
required
MSID