Configure mobile interfaces
Digi TransPort User Guide 213
Related CLI commands-SIM Slot 2 (PPP 1)
Entity Instance Parameter Values Equivalent Web Parameter
modemcc 0 sms_interval_2 Poll for incoming SMS messages:-
Every n minutes
modemcc 0 sms_replies_2 on/off Enable command replies via SMS
modemcc 0 sms_concat_2 Number
0=off
10=default when
enabled
Concatenate replies
modemcc 0 Sca_2 Free text field Use this SMS message centre number
n instead of the network default
modemcc 0 sms_access_2 0=Super (default)
1=High
2=Medium
3=Low
4=None
5=HighLow
6=HighMedium
7=CheckPar
SMS access level:
modemcc 0 sms_cmd_sep Free text field Use as a command separator (default
is CR)
modemcc 0 sms_callerid Mobile telephone
number
Allow CLI commands from the
following SMS numbers.
(First SMS number)
modemcc 0 sms_callerid_1 to 9 Mobile telephone
number
Allow CLI commands from the
following SMS numbers.
(additional SMS numbers 1 to 9)
To Next Page
Loading...
