Configure DSL interfaces
Digi TransPort User Guide 222
Related CLI Commands
Additional CLI commands
The following command is not available from the web interface:
adsl 0 debug {0|1}
Where 0 is off and 1 causes debugging information to be sent to the CLI.
Entity Instance Parameter Values
Equivalent Web Parameter
adsl 0 oper_mode Multi,ANSI,G.dmt,G.lite,A
DSL2, ADSL2+
Operational mode
adsl 0 usefwfile ON/OFF Load DSL firmware from flash file
adsl 0 watchdog ON/OFF Enable watchdog
apvc 0 oammanage ON/OFF Manage this PVC using ATM OAM cells
To Next Page
Loading...
