Digi TransPort - Page 230

Configure ISDN interfaces
Digi TransPort User Guide 230
Related CLI commands
Entity Instance Parameter Values Equivalent Web Parameter
ppp 0 name Free text field Description:
ppp 0 cingnb number ending with
ppp 0 msn number with ISDN MSN ending with
ppp 0 sub number with ISDN sub-address ending with
ppp 0 ipaddr IP address Local IP Address:
ppp 0 mask Network mask Mask:
ppp 0 ipmin IP address Assign remote IP addresses from a.b.c.d to
a.b.c.d
ppp 0 iprange 1-255 Assign remote IP addresses from a.b.c.d to
a.b.c.d
ppp 0 dnsserver IP address Primary DNS server:
ppp 0 secdns IP address Secondary DNS server:
ppp 0 do_nat 1 Enable NAT on this interface
IP Address:
ppp 0 do_nat 2 Enable NAT on this interface
IP address and Port:
ppp 0 ipsec 1 Enable IPsec on this interface
ppp 0 ipsec 2 Keep Security Associations (SAs) when this
ISDN interface is disconnected
ppp 0 ipsecent Default,Ethernet,PPP Use interface X, Y for the source IP address
of IPsec packets
ppp 0 ipsecadd number Use interface X, Y for the source IP address
of IPsec packets
ppp 0 firewall on/off Enable the firewall on this interface