Digi TransPort - Page 273

Configure serial interfaces
Digi TransPort User Guide 273
Profiles
Each serial port can have two profiles which can be configured differently. Which profile is in
force when the router powers-up is selected here.
Power-up profile n
Select 0 from the drop-down selection box to choose profile 0 to be active when the router
powers-up. Select 1 from the selection box to make profile 1 the active profile.
Load Profile n
Select 0 from the drop-down selection box and click the button to load profile 0.
Save Profile
Select 0 from the drop-down selection box and click the button to save profile 0 after making
any changes.
Related CLI commands
Entity Instance Parameter Values Equivalent Web Parameter
&Yn Where n =
0,1
Power-up profile n
&Zn Where n =
0,1
Load Profile n
&Wn Where n =
0,1
Save Profile n