Digi TransPort - Page 317

Configure Advanced interfaces settings
Digi TransPort User Guide 317
Allow remote end to request callback
Controls whether or not the router will respond to incoming callback requests. The options
are:
•Off
•Desired
•Required.
Allow this unit to authenticate using
CHAP-MD5
Selecting enabled from the drop-down menu allows the router to authenticate logins using
the CHAP MD-5 algorithm.
MS-CHAP
Selecting enabled from the drop-down menu allows the router to authenticate logins using
Microsoft’s proprietary MS-CHAP algorithm.
MS-CHAPv2
Selecting enabled from the drop-down menu allows the router to authenticate logins using
version 2 of Microsoft’s proprietary MS-CHAP algorithm.
Allow a remote unit to authenticate using
CHAP-MD5
When enabled, allows the router to authenticate with a remote unit using the CHAP-MD5
algorithm.
MS-CHAP
When enabled, allows the router to authenticate with a remote unit using Microsoft’s MS-
CHAP algorithm.
MS-CHAPv2
When enabled, allows the router to authenticate with a remote unit using version 2 of
Microsoft’s MS-CHAP algorithm.