Digi TransPort - Page 322

Configure Advanced interfaces settings
Digi TransPort User Guide 322
PPP Sub-Configs parameters
PPP Sub-Configs is an alternative to using an entire PPP instance if only a few parameters are
different to those in an existing PPP instance. Using PPP Sub-Configs, you can define up to 50
sub-configs and saves them on system memory.
To configure the PPP Sub-Configs parameters, set the following values:
Nb
The instance number for a sub-config.
Description
The name to easily identify the sub-config.
Username
The username that is used when authenticating with the remote system and is usually only
required for outgoing PPP calls.
Password
The password for authentication with the remote system.
Confirm
When changing the password, enter it into this text box also to allow the router to check for
simple typing errors.
Dialout Number
The ISDN number to make outgoing calls. This must be a valid number in order to allow the
router to make outgoing calls. This number could be the number of the Internet Service
Provider (ISP) or another router.