Digi TransPort - Page 386

Virtual Routing and Forwarding (VRF)
Digi TransPort User Guide 386
Equivalent Cross Virtual Routing Entry
The Equivalent Cross Virtual Routing Entry and Cross Virtual Routing Entry objects describe the
first dimension of a cross virtual routing table, as an array of Cross Virtual Routing Entry objects
sharing a single Virtual Routing Forwarding (VRF) Entity destination.
Cross Virtual Routing Entry
Attribute name Attribute description Scheme Polling interval
Virtual Routing Entries Array of Cross Virtual Routing Entry
objects sharing a single destination
IPCore Configuration
Exported Route Targets Virtual Routing Entity (VRF) name IPCore Configuration
Attribute name Attribute description Scheme Polling interval
Outgoing Virtual Routing
Entity Identifier
Outgoing virtual routing entity Object
Identifier (OID)
IPCore Configuration
Incoming and Outgoing
Virtual Routing Tags
Incoming and outgoing virtual routing
tags
IPCore Configuration
Destination IP Subnet Final destination IP subnet IPCore Configuration
Next Hop IP Address Type List of the address families (IPv4, IPv6, or
both)
IPCore Configuration
Type Route entry type (Null, Other, Invalid,
Direct, Indirect, Static)
IPCore Configuration
Routing Protocol Type Routing protocol type (Null, Other, Local,
Network Managed, ICMP, EGP, GGP, Hello,
RIP, IS-IS, ES-IS, Cisco IGRP, BBN, SPF IGP,
OSPF, BGP, EIGRP)
IPCore Configuration
Outgoing Interface Name Address resolution entity (ARP entity) IPCore Configuration