FTP Relay n parameters
Digi TransPort User Guide 473
If unable to relay file Delete File / Retain file
These two radio buttons select the behavior with respect to storing the file if the router fails to
connect to the FTP host (after retrying for the specified number of attempts). Select
Delete File if the file should not be stored permanently. If the file is retained, manual
intervention is required to recover it at a later stage.
Note If the file is not retained, it will be lost if the power is removed from the router.
Email the file before storing or deleting it
The configuration options following this checkbox are normally disabled (they should appear
disabled in the browser). When this checkbox is enabled, the parameters are enabled and
data can be entered into the text boxes.
Use Email Template File
The name of the template file that will be used to form the basis of any email messages
generated by the FTP Relay Agent. This would normally be the standard EVENT.EML template
provided with the router but alternative templates may be created if necessary (see Email
Notification parameters on page 589).
To
The email address of the recipient of email messages generated by the FTP Relay Agent.
From
The email address of the router. In order for this to work, an email account must be in place
with the Internet Service Provider.
Subject
A brief description of the content of the email.
To Next Page
Loading...
