Configure TPAD parameters
Digi TransPort User Guide 514
IP length header
When making a TCP socket connection (such as the transport protocol has been set to TCP),
setting this parameter to On will pre-pend the data sent to the host with a 2-byte length
header. The 2-byte length header is not included in the length calculation. When set to 8583
Ascii 4 byte, the IP length header conforms to the ISO 8583 format. Setting this parameter to
On Inclusive pre-pends a 2-byte length header, and the calculation of the length includes the
2 bytes of the length header.
TPAD Settings
Use Terminal ID (TID)
Inserts or replaces a Terminal ID in the APACS 30 string.
Replace TID provided by connected terminal with configured TID
When enabled, any Terminal ID provided by a connected terminal is replaced by the ID set in
the Use Terminal ID field above.
To Next Page
Loading...
