Configure X.25 parameters
Digi TransPort User Guide 535
PADS parameters
PAD which stands for Packet Assembler Dissembler, is used to interface between a character
based serial connection and an X.25 synchronous packet switched network.
There are two main elements to the configuration procedure for accessing X.25 networks:
• General and service related parameters
•PAD parameters (X.3)
Each X.25 PAD configuration page also includes a sub-page detailing the X.3 PAD parameters.
Collectively this set of values is known as a PAD profile. Your router contains four pre-defined
standard PAD profiles numbered 50, 51, 90 and 91. You can also create up to four custom PAD
profiles numbered 1 to 4 for each PAD instance.
To Next Page
Loading...
