SMTP Account parameters
Digi TransPort User Guide 607
Attachment size limit n Kbyte, Mbyte
Some email service providers place a limit on the size of an email attachment that they will
accept, this parameter can be used to ensure that the limit is not exceeded. The traffic
analyser and event logger can generate substantial files, and it may be required that these
files are truncated when sent as email attachments. The size is specified in kilobytes. For
example, setting this limit to 250 truncates the attachment to 250kB before transmission.
Setting the size to 0 means that no limits are imposed.
If the email template does not contain one, use “Reply To” address
This address is inserted into the email header if no reply address exists in the appropriate
email template. If the email template does contain an address in the reply to: field, that will
override the default reply address.
Route using Routing table, Interface x,y
When selected, the routing code determines the outbound interface, and that interface
determines the source IP address. If the Route using routing table option is not selected, the
settings in the interface and interface instance text boxes determine the outbound interface
and source IP address. These are selected from the drop-down selection box and are None,
PPP, and Ethernet.
Resend the email after s seconds if the first attempt fails
This checkbox and associated text entry box enable the retry mechanism. If the first attempt
to deliver the email fails, the router waits the specified number of seconds (which must be
non-zero) before making another attempt.
To Next Page
Loading...
