Remote Manager parameters
Digi TransPort User Guide 630
To configure the Remote Manager SMS Settings, set the following values:
Enable Remote Manager SMS
Check this box to enable Remote Manager SMS feature
Enable Opt-in
Enable the opt-in to ensure that you have subscribed to the SMS service. Check this box to
enable opt-in.
Enable Strict Sender
You can enable the Strict Sender mode to ensure that the SMSs from Remote Manager are
never blocked. Check this box to enable the Strict Sender framework.
Enable responses to be sent to the sender’s phone number
Check this box to enable responses to be sent to the sender’s phone number.
Accept Remote Manager client connection requests
Enable client connection requests to accept the incoming connections. Check this box to
enable Remote Manager client connection requests.
Accept requests to connect to other Remote Manager servers
Check this box to accept request to connect to other Remote Manager servers.
Override the destination phone number with the following number
Check this box to override the destination phone number with another phone number. Once
you check this box, the phone number text box is enabled. You can enter the phone number
in this text box.
Override the service ID with the following value
Check this box to specify the service ID value. Once you check this box, the service ID text box
is enabled. You can enter your service ID in this text box.
Limit CLI response to
You can specify the maximum CLI response size in this text box.
To Next Page
Loading...
