Digi TransPort - Page 634

Remote Manager parameters
Digi TransPort User Guide 634
Related CLI commands
cloud command
cloudstat command
There is an additional cloud CLI command, cloudstat. Enter this command without parameters
to return the status of the socket connections, such as whether there is a live connection to the
Remote Manager server.
Entity Instance Parameter Values Equivalent Web Parameter
cloud n idledisconn 0,1 Disconnect when Remote
Manager server is idle
0=Do not disconnect
1=Disconnect
cloud n disconnsecs 0-28800 Idle Timeout h,m,s
This CLI value is entered in
seconds only.
cloud n ppprxkeepalive 0-28800 WAN - Receive Interval seconds.
cloud n ppptrxkeepalive 0-28800 WAN - Transmit Interval seconds.
cloud n pppwaitfor 1-255 WAN - Assume connection is lost
after n timeouts.
cloud n ethrxkeepalive 0-28800 Ethernet - Receive Interval
seconds.
cloud n ethtxkeepalive 0-28800 Ethernet - Transmit Interval
seconds.
cloud n ethwaitfor 1-255 Ethernet - Assume connection is
lost after n timeouts.