Digi TransPort - Page 643

SNMP parameters
Digi TransPort User Guide 643
Related CLI commands
Entity Instance Parameter Values Equivalent Web Parameter
snmptrap n IPaddr Valid IP address
such as 1.2.3.4
Trap Server IP Address a.b.c.d
snmptrap n port 0-65535 Port
Default=162
snmptrap n version v1, v2c, v3 Use SNMP Version
snmptrap n sendInforms on | off Send “Inform Request” messages
snmptrap n informto Integer If no response, retransmit the
Inform Request message after n
seconds
snmptrap n informretries Integer Retransmit a maximum n times
snmptrap n community String Community
snmptrap n engineid String Trap Server Engine ID
snmptrap n securityname String SNMP User
snmptrap n securitylevel noauthnopriv
authnopriv
authpriv
User Security Level
noauthnopriv=No
Authentication, No Privacy
authnopriv=Auth, No Priv
authpriv=Auth & Priv