Digi TransPort - Page 714

View network interface status
Digi TransPort User Guide 714
Mobile Information
For GSM networks, the Mobile Information section can have the following items.
SIM Status
This indicates whether or not a valid SIM card has been installed in the router. It may be one
of the following
• READY: SIM is OK.
• SIM PIN: PIN number required.
• SIM PUK: SIM blocked (unblocking code required).
• ERROR: SIM is not installed or is faulty.
Radio Technology
The current network technology in use. It may be one of the following
•GSM
•GPRS
•EDGE
•UMTS
•HSDPA
•HSUPA
•CDMA
Manufacturer
The manufacturer of the mobile module.
Model
The model of the mobile module.
IMEI
The International Mobile Equipment Identification (IMEI) of the mobile module.
ESN
The Electronic Serial Number (ESN) of the mobile module.
MEID
The Mobile Equipment Identifier (MEID) of the mobile module.
IMSI
The International Mobile Subscriber Identity (IMSI) of the mobile module.
ICCID
This field specifies Integrated Circuit Card Identifier (ICCID) of the SIM card.
Firmware
This specifies firmware running on mobile module.
Bootcode
This field specifies bootcode firmware running on the mobile module.