Digi TransPort - Page 748

Manage connections
Digi TransPort User Guide 748
IPComp
The data compression algorithm in use, if any.
KBytes Delivered
The total amount of data that has been transferred (in both directions) over this IPsec tunnel.
KBytes Left
The amount of data left to be transferred over the IPsec tunnel before the data duration limit
is reached. The data duration is negotiated between the router and the remote device.
Time Left
The time left, in seconds, before the time duration limit is reached. The time duration is
negotiated between the router and the remote device.
Interface
The interface over which the IPsec tunnel operates.
Related CLI commands
Command Options Description
sastat [dyn] Displays the current status of all of the IPsecs tunnels.
The optional dyn parameter can be used to display the status of the
dynamic IPsec tunnels.
sastat [dyn] <first> <last> Displays the current status of the IPsec tunnels in the range from
<first> to <last>. such as sastat 0 49 or sastat dyn 0 49.
sastat [dyn] peer <peer> Displays the current status of the IPsec tunnels that match the given
peer. The <peer> value can contain the * wildcard character. such as
sastat peer uk-north-* or sastat dyn peer uk-north-*.