Control|24 Guide112
6 Press the channel’s INSERT switch again to re-
turn to the Control|24 default mode. The scrib-
ble strips will display track names, the encoders
will become panning controls, and the faders
will adjust each channel’s level.
Shortcuts
◆ Double-press an INSERT switch (pressing
twice in quick succession). This will directly ac-
cess a plug-in for editing. The plug-in selected
will either be the first in the channel inserts, or
the last-edited plug-in.
◆ Double-pressing a channel INSERT switch
multiple times will cycle sequentially through
the channel’s current inserts (1–5).
Plug-In Symbols
There are several shorthand symbols and capi-
talization schemes that indicate information
about a plug-in’s status and configuration.
Capitalization of Plug-In Name Active plug-ins
are shown in lower case; plug-ins that are by-
passed are shown in upper case.
The “@” Symbol An “@” in front of a plug-in’s
name means the plug-in is inactive.
Mono Plug-In A mono plug-in is indicated by an
“m” in front of the plug-in name.
Stereo Plug-In A stereo plug-in is indicated by an
“s” in front of the plug-in name.
Mono/Stereo Plug-In A mono/stereo plug-in is
indicated by “ms” in front of the plug-in name.
Multi-Mono Plug-In A multi-mono plug-in is in-
dicated by a raised “.” in front of the plug-in
name.
Displaying Plug-In Parameters on
the Channel Scribble Strips
When a plug-in has been assigned to an insert
position and its parameters are displayed on the
scribble strips, the parameters become available
for editing.
Display of Plug-Ins and Plug-In Pages
Because some plug-ins have more parameters
than Control|24 has physical channels, these
controls are banked through a collection of con-
trol “pages,” each of which consists of up to 24
parameters.
Control|24 banks through the total number of
parameters in groups of 24. Some plug-in pages
may contain “blank” locations where a given
control is not active.
To select a different plug-in page:
1 Select and display a plug-in across the scribble
strips.
2 Press a lit switch in the CHANNEL BAR
SCROLL section, that will indicate that there is
at least one more page in that switch’s direction.
3 On-screen, the plug-in parameters currently
under the control of Control|24 will be high-
lighted blue.
If there are more parameters than fit across
the 24 scribble strips, you can access addi-
tional pages, if any, with the CHANNEL
BAR SCROLL switches labeled <MORE and
MORE>. These switches are located at the
right end of the scribble strips.
To Next Page
Loading...
Need help?
General
