Digisol DG-GS4528SE - Page 1003

C HAPTER 33 | Automatic Traffic Control Commands
ATC Display Commands
– 1020 –
RELATED COMMANDS
auto-traffic-control alarm-clear-threshold (1013)
auto-traffic-control action (1012)
auto-traffic-control release-timer (1010)
ATC Display Commands
show auto-traffic-
control
This command shows global configuration settings for automatic storm
control.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show auto-traffic-control
Storm Control Broadcast
Apply Timer (sec) : 300
Release Timer (sec) : 900
Storm Control Multicast
Apply Timer (sec) : 300
Release Timer (sec) : 900
Console#
show auto-traffic-
control interface
This command shows interface configuration settings and storm control
status for the specified port.
SYNTAX
show auto-traffic-control interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show auto-traffic-control interface ethernet 1/1
Eth 1/1 Information
------------------------------------------------------------------------
Storm Control: Broadcast Multicast
State: Disabled Disabled
Action: Rate Control Rate Control
Auto Release Control: Disabled Disabled
Alarm Fire Threshold(Kpps): 128 128
Alarm Clear Threshold(Kpps):128 128
Trap Storm Fire: Disabled Disabled