C
HAPTER
22
| System Management Commands
Banner Information
– 712 –
DEFAULT SETTING
None
COMMAND MODE
Global Configuration
COMMAND USAGE
Input strings cannot contain spaces. The banner configure mux
command interprets spaces as data input boundaries. The use of
underscores ( _ ) or other unobtrusive non-letter characters is suggested
for situations where white space is necessary for clarity.
EXAMPLE
Console(config)#banner configure mux telco-8734212kx_PVC-1/23
Console(config)#
banner configure note This command is used to configure the note displayed in the banner. Use
the no form to restore the default setting.
SYNTAX
banner configure note note-info
no banner configure note
note-info - Miscellaneous information that does not fit the other
banner categories, or any other information of importance to users
of the switch CLI. (Maximum length: 150 characters)
DEFAULT SETTING
None
COMMAND MODE
Global Configuration
COMMAND USAGE
Input strings cannot contain spaces. The banner configure note
command interprets spaces as data input boundaries. The use of
underscores ( _ ) or other unobtrusive non-letter characters is suggested
for situations where white space is necessary for clarity.
EXAMPLE
Console(config)#banner configure note !!!!!ROUTINE_MAINTENANCE_firmware-
upgrade_0100-0500_GMT-0500_20071022!!!!!_20min_network_impact_expected
Console(config)#
To Next Page
Loading...
