Digisol DG-GS4528SE - Table 63: Time Range Commands; Time Range

C HAPTER 22 | System Management Commands
Time Range
– 764 –
show calendar This command displays the system clock.
DEFAULT SETTING
None
COMMAND MODE
Normal Exec, Privileged Exec
EXAMPLE
Console#show calendar
15:12:34 February 1 2011
Console#
TIME RANGE
This section describes the commands used to sets a time range for use by
other functions, such as Access Control Lists.
time-range This command specifies the name of a time range, and enters time range
configuration mode. Use the no form to remove a previously specified time
range.
SYNTAX
[no] time-range name
name - Name of the time range. (Range: 1-16 characters)
DEFAULT SETTING
None
COMMAND MODE
Global Configuration
COMMAND USAGE
This command sets a time range for use by other functions, such as Access
Control Lists.
Table 63: Time Range Commands
Command Function Mode
time-range Specifies the name of a time range, and enters time
range configuration mode
GC
absolute Sets the time range for the execution of a command TR
periodic Sets the time range for the periodic execution of a
command
TR
show time-range Shows configured time ranges. PE