C
HAPTER
23
| SNMP Commands
SNMPv3 Commands
– 788 –
Security Model : v3
Security Level : Anthentication and privacy
Authentication Protocol : MD5
Privacy Protocol : DES56
Storage Type : Nonvolatile
Row Status : Active
Console#
show snmp view This command shows information on the SNMP views.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show snmp view
View Name: mib-2
Subtree OID: 1.2.2.3.6.2.1
View Type: included
Storage Type: permanent
Row Status: active
View Name: defaultview
Subtree OID: 1
View Type: included
Storage Type: volatile
Row Status: active
Console#
Table 68: show snmp user - display description
Field Description
Engine ID String identifying the engine ID.
User Name Name of user connecting to the SNMP agent.
Group Name Name of an SNMP group.
Security Model The user security model: SNMP v1, v2c or v3.
Security Level Indicates if authentication or encryption are used.
Authentication Protocol The authentication protocol used with SNMPv3.
Privacy Protocol The privacy protocol used with SNMPv3.
Storage Type The storage type for this entry.
Row Status The row status of this entry.
SNMP remote user A user associated with an SNMP engine on a remote device.
To Next Page